Gas Turbine and Auxiliaries in Power Plants

Learn how gas turbines work together with its auxiliary systems to generate electric power

What you'll learn:
How gas turbine works
Identify gas turbine components and their function
Electric power generation plants and their auxiliary systems
Analyze Bryton cycle and apply it on gas turbine
How electric generators work, how generators are injected with excitation current and how they produce three-phase AC electric power
How fuels, gas and oil, are prepared, processed and regulated before combustion
How combustion and ignition occur inside the combustion chamber, and how exhaust gases rotate turbine shaft
How fuel pipelines and combustion chamber are purged and cleaned by Nitrogen and NOx water
Understand all oil systems found in power plants that use gas turbines, including cooling and lubrication oil, jacking oil, control oil and rotor barring oil
How combustion air is processes, regulated, compressed and prepared for combustion
How inlet guide vanes IGV work
How blow-off valves prevent compressor surge
How pulse filter cleaning system work
Understand how transformers work and identify transformer types and their function and when to use each one.

Requirements
No prior knowledge of gas turbine or power plants is required as we start from scratch in this course
You don't need any engineering experience at all, this is the beauty of this course
No engineering tools is required
You only need a desire to learn!

Description
Gas Turbine in Power Plants: A Complete Guide to Gas Turbines

Gas turbine is one of the most popular turbines used for electric power generation in power plants

You can simply learn how gas turbine and its auxiliary systems work together in power plants to generate electric power WITHOUT having any prior experience in engineering, as this course is suitable for anyone interested in gas turbine regardless of their background

This course is made to teach anyone, even a complete beginner, how to deal with any main or auxiliary system of gas turbine in power plants. By the end of this course, you'll be ready to apply for a job in oil and power field, particularly power plants, and make a good impression at an interview, as this course covers every system that you could find in any power plant that use gas turbines.

About This Course

In this course, we're going to start from STEP ZERO! If you know nothing about machines, electricity, power plants, gas turbines, transformers or generators, don't worry! Every topic discussed in this course is explained from scratch.

This course starts with defining gas turbine, its components, and what each component does, and explains how gas turbines are used in power plants and their configurations, whether single-cycle or combined-cycle power plants. This course also analyzes the Bryton cycle and applies it on gas turbines.

This course also explains the basics of electricity and three-phase electric power, preparing you for understanding transformers, generators and induction theory that explains how generators produce electricity.

Fuel gas and oil preparation, processing, regulation and filtration are also included in this course. You will go through every step of fuel processing from the supplier to combustion, and you'll learn about fuel ignition and combustion in detail.

This course also covers purging systems, it explains NOx water purging and Nitrogen purging, which a process expels fuel remains from pipelines and combustion chambers after turbine shutdown and startup.

Oil systems, which are the most important systems of gas turbines, are also covered in details in this course. Each oil system and every component of every system is explained in details, from the lube oil system, which is used for turbine bearings cooling and lubrication, to jacking oil system, which is used to lift turbine shaft up, to power oil system, which is used to control hydraulic valves and safety valves, to rotor barring oil system, which is used to rotate turbine shaft right before startup and after shutdown.

This course also covers closed-cycle cooling water system and explains every part of it. Also, various types of coolers are explained, as well as the heat exchange process in each one. You'll learn how closed-cycle cooling water is used to cool down oil systems and generator windings.

Air intake system is also included in this course in details, as each component of the system explained, including air filtration, pulse filters cleaning, air regulation, airflow control by variable inlet guide vanes, compressor surge suppression by blow-off valves and the use of compressor air for turbine sealing and cooling.

This course explains how transformers work, their parts, what each part of transformer does, types of transformers and when to use each type. Transformers configuration in power plants is also explained in this course.

As you can see, this course is comprehensive, I hope you'll make the best out of it and understand how electric power plants use gas turbines to generate electric power.

Who this course is for
This course is for you if you're interested in electric power generation plants, gas turbines or oil and power field regardless of your background
This course is perfect for you if you are a mechanical, electrical, control, instrumentation, process, operations, maintenance or mechatronics engineer or technician
This course is for any student who have a desire to learn about gas turbines and electric power plants

Homepage

https://www.udemy.com/course/gas-turbine/