Microstation - Learn 2D And 3D Cad Design

What you'll learn
Microstation commands
Plan drawing using levels
Dimmensions and printing layouts
Real work with an architectural design
Unique course. Designed exactly with the commands and excercises of the best seller AutoCAD course.
Requirements
the course is from cero
Description
In this course, we will learn the basics of Microstation. Starting with lectures, we will go through 27 lectures in order to completely understand all the basics. Once lectures are completed, 15 exercises will be completed one by one that will lead to the final project. The project is for student to complete in all respects; however, 10 lectures are added after exercise in case student wants to complete the project with aid of these lectures.#AulaGEOLesson 1 - IntroductionIn this lesson, we will have a short introduction of software "Microstation" by getting a little know how about this software, its capabilities and over all usage.Lesson 2 - InterfaceIn this session, we will see the basic interface of Microstation, learning some basic points to hit in case we need to perform specific functions and access different commands.Lesson 3 – Keyboard shortcutsIn this session, we will learn some hot keys commonly used in Microstaiton. The purpose of showing these keys in start of course is to make students aware of these keys so that they could use through out the course and learn well.Lesson 4 – Common ToolbarIn this session, we will learn about the very basic and common tool bar of Microstation as it is necessary to understand before we could proceed to next list of toolbars.Lesson 5 – Q ToolsIn this session, we will learn different tools and commands available in category of "Q" as these can be accessed with keyboard shortcut of "Q" respectively.Lesson 6 – W ToolsIn this session, we will learn different tools and commands available in category of "W" as these can be accessed with keyboard shortcut of "W" respectively.Lesson 7 – E ToolsIn this session, we will learn different tools and commands available in category of "E" as these can be accessed with keyboard shortcut of "E" respectively.Lesson 8 – R ToolsIn this session, we will learn different tools and commands available in category of "R" as these can be accessed with keyboard shortcut of "R" respectively.Lesson 9 – T ToolsIn this session, we will learn different tools and commands available in category of "T" as these can be accessed with keyboard shortcut of "T" respectively.Lesson 10 – A ToolsIn this session, we will learn different tools and commands available in category of "A" as these can be accessed with keyboard shortcut of "A" respectively.Lesson 11 – S ToolsIn this session, we will learn different tools and commands available in category of "S" as these can be accessed with keyboard shortcut of "S" respectively.Lesson 12 – D ToolsIn this session, we will learn different tools and commands available in category of "D" as these can be accessed with keyboard shortcut of "D" respectively.Lesson 13 – F ToolsIn this session, we will learn different tools and commands available in category of "F" as these can be accessed with keyboard shortcut of "F" respectively.Lesson 14 – Editing ToolsIn this session, we will how to edit and modify the geometries or primitives drawn using tools and commands learnt in previous sessions.Lesson 15 – Level ManagerIn this session, we will learn how to add, remove and apply different levels using level manager. It is sometimes referred as layers too.Lesson 16 – ArrayIn this session, we will learn how to create different types of arrays in Microstation like linear, polar or rectangular.Lesson 17 – Move ParallelIn this session, we will learn how to offset a specific line, arc or a complete element. We can simply move a specific element or even copy at certain distance from reference pointLesson 18 – DimensionsIn this session, we will learn how to dimension different lines, arcs and ultimately give specific style dimension to entire element.Lesson 19 – Snap ToolbarIn this session, we will learn how to use snap toolbar as there are different very important snaps which can be used to create accurate geometries in no time like mid point snap, intersect snap and bisector etc.Lesson 20 – DWG ConversionIn this session, we will learn how to convert Autodesk AutoCAD file to Microstation format.Lesson 21 – PDF ConversionIn this session, we will learn how to convert Adobe PDF file to Microstation format.Lesson 22 – Excel ConversionIn this session, we will learn how to convert Microsoft Excel sheet to Microstation format and link it for future changes.Lesson 23 – New ModelIn this session, we will learn how to create a new model.Lesson 24 – New SheetIn this session, we will learn how to create a new sheet.Lesson 25 – Title BlockIn this session, we will learn how to create a title block.Lesson 26 – PlotIn this session, we will learn how to print or plot a specific sheet and understand the basics of pen table.Lesson 27 – HatchIn this session, we will learn how to use hatch command in detailExercise 1 – Cooking RangeIn this exercise, we will create a 2D top view of cooking range.Exercise 2 – Kitchen ShelfIn this exercise, we will create a 2D top view kitchen shelf.Exercise 3 – Cupboard ViewsIn this exercise, we will create 2D top view and front view of cupboards.Exercise 4 – Kitchen AppliancesIn this exercise, we will view and access collection of kitchen appliances.Exercise 5 – Dining TableIn this exercise, we will create a 2D top view of dining table.Exercise 6 – Sofa Chair SetIn this exercise, we will create a 2D top view of sofa chair set.Exercise 7 – Auxiliary FurnitureIn this exercise, we will view and access collection of auxiliary furniture.Exercise 8 – BedIn this exercise, we will create a 2D top view of bed.Exercise 9 – Beds CollectionIn this exercise, we will view and access collection of beds.Exercise 10 – BathtubIn this exercise, we will create a 2D top view of bathtub.Exercise 11 – Washroom WCIn this exercise, we will create a 2D top view of washroom WC.Exercise 12 – Washroom AccessoriesIn this exercise, we will view and access collection of washroom accessories.Exercise 13 – CarsIn this exercise, we will view and access collection of cars.Exercise 14 – DIY ProjectIn this exercise, we will view a 2D layout with different areas and furniture. Students must recreate this project in order to fully implement all the tools and commands learnt throughout the course. In case students cannot create it correctly, they can follow additional 10 lectures at end of this course to follow the creation of this project step-by-step.Exercise 15 – Introduction to 3DIn this exercise, we will have an overview of three-dimensional primitives.Additional Lecture 1 to Lecture 10In these ten lectures, we will see step-by-step method to create the DIY project, i.e. 2D floor plan.3D Modeling.This is a new module added, which includes the 3D modeling tools using a house as example from the 2D lines to rendering.3D modeling - 3D house projecdtLecture 54: IntroductionLecture 55: User Interface and NavigationLecture 56: Keyboard ShortcutsLecture 57: Base with Wall Creation & Learn Extrude CommandLecture 58: Window Space 1 & Learn Copy,Move,Snap CommandLecture 59: Window Space 2 & Learn Subtract CommandLecture 60: Door Space 2 & Learn Union CommandLecture 61: Widow Creation/ Placement & Learn Rotate CommandLecture 62: Exhaust Creation/ Placement & Learn Path Array CommandLecture 63: Door Creation & Learn Cut Solid by Curve CommandLecture 64: Door Placement & Learn Scale CommandLecture 65: Rooftop Creation & Learn Sweep CommandLecture 66: Entrance Base Creation & Learn to manipulate coordinatesLecture 67: Pillar Creation & Learn Polar Rotated ArrayLecture 68: Importing Models via 3D Warehouse & Other FormatsLecture 69: Boundary Wall and Floor CreationLecture 70: Presentation ModesLecture 71: Apply Material to ModelLecture 72: Light Manager and Render Model
Overview
Section 1: PHASE - 1 The tools and commands
Lecture 1 Introduction
Lecture 2 Interface
Lecture 3 Keyboard Shortcuts
Lecture 4 Common Tool Bar
Lecture 5 Q - Tools
Lecture 6 W - Tools
Lecture 7 E - Tools
Lecture 8 R - Tools
Lecture 9 T - Tools
Lecture 10 A - Tools
Lecture 11 S - Tools
Lecture 12 D - Tools
Lecture 13 F - Tools
Lecture 14 Editing Tools
Lecture 15 Level Manager
Lecture 16 Array
Lecture 17 Move Parallel
Lecture 18 Dimensions
Lecture 19 Snap Tool Bar
Lecture 20 DWG to DGN
Lecture 21 PDF to DGN
Lecture 22 EXCEL to DGN
Lecture 23 New Model
Lecture 24 New Sheet
Lecture 25 Title Block
Lecture 26 Plot
Lecture 27 Hatch
Section 2: PHASE - 2 Excercises
Lecture 28 Cooking Range
Lecture 29 Kitchen Shelf
Lecture 30 Cupboard Views
Lecture 31 Kitchen Appliances
Lecture 32 Dining Table
Lecture 33 Sofa Chair Set
Lecture 34 Auxiliary Furniture
Lecture 35 Bed
Lecture 36 Beds
Lecture 37 Bath Tub
Lecture 38 Washroom WC
Lecture 39 Washroom Accessories
Lecture 40 Cars
Lecture 41 DIY Project
Lecture 42 Slight Introduction of 3D
Section 3: PHASE - 3 House project
Lecture 43 Create Cells
Lecture 44 Reference Lines
Lecture 45 Walls
Lecture 46 Doors
Lecture 47 Windows
Lecture 48 Boundary Walls
Lecture 49 Cell Placement
Lecture 50 Space Naming
Lecture 51 Hatching
Lecture 52 Dimensions
Lecture 53 Bulk export from microstation dgn files to dxf or dwg
Section 4: Introduction to 3D Modeling - Mechanical piece
Lecture 54 Introduction
Lecture 55 User Interface and Navigation
Lecture 56 Keyboard Shortcuts
Lecture 57 Design File
Lecture 58 Primitive Solids (E Tools)
Lecture 59 Element Handles, Draw on Solid & Modify Tools
Lecture 60 Solid By Extrusion (R Tool)
Lecture 61 Solid By Revolution (R Tool)
Lecture 62 Solid By Extrusion Along (R Tool)
Lecture 63 Solid By Thicken Surface (R Tool)
Lecture 64 Linear Solid (R Tool)
Lecture 65 Boolean Tools - Unite | Intersect | Subtract
Lecture 66 Trim Solids
Lecture 67 Cut Solids by Curves
Lecture 68 Chamfer and Fillets
Lecture 69 Mechanical Model - Sprocket
Lecture 70 3D to 2D Conversion
Lecture 71 2D Views Sheet from 3D Model
Lecture 72 Section Views - Volume Clipping
Section 5: 3D modeling - 3D house project
Lecture 73 Introduction
Lecture 74 User Interface and Navigation
Lecture 75 Keyboard Shortcuts
Lecture 76 Base with Wall Creation & Learn Extrude Command
Lecture 77 Window Space 1 & Learn Copy,Move,Snap Command
Lecture 78 Window Space 2 & Learn Subtract Command
Lecture 79 Door Space 2 & Learn Union Command
Lecture 80 Widow Creation/ Placement & Learn Rotate Command
Lecture 81 Exhaust Creation/ Placement & Learn Path Array Command
Lecture 82 Door Creation & Learn Cut Solid by Curve Command
Lecture 83 Door Placement & Learn Scale Command
Lecture 84 Rooftop Creation & Learn Sweep Command
Lecture 85 Entrance Base Creation & Learn to manipulate coordinates
Lecture 86 Pillar Creation & Learn Polar Rotated Array
Lecture 87 Importing Models via 3D Warehouse & Other Formats
Lecture 88 Boundary Wall and Floor Creation
Lecture 89 Presentation Modes
Lecture 90 Apply Material to Model
Lecture 91 Light Manager and Render Model
Section 6: Bonus lessons
Lecture 92 Cell edition
Lecture 93 Editing tools question
Section 7: Terrains using Microstation - bonus section
Lecture 94 Terrain - xml file import
Lecture 95 Terrain - element information
Lecture 96 Terrain - display and adjustment
Lecture 97 Terrain - contour labeling
Lecture 98 Terrain - contours spots
Section 8: Working with isometric designs - bonus lesson
Lecture 99 Isometric - 3d model with respective 2D views
Lecture 100 Isometric - dimensioning isometric views
Lecture 101 Isometric - export each 2D view to different file
Lecture 102 Isometric - views to new sheet layouts
engineers, architects and students,bim modelers,draft enthusiasts,autocad students wishing to understand microstation,bentley systems users


Homepage

https://www.udemy.com/course/microstation-learn-cad-design-from-cero-with/