AWS - Certified Welding Inspector- SMAW/PAW/GTAW Processes

Certified Welding Inspector Examination Preparation Training Course -AWS, Module-1,Welding Processes -SAW/GMAW/FCAW/EGW)
What you'll learn
Students learn and prepare for the American Welding Society - Certified Welding Inspector Examination
Students learn the skills of Certified Welding Inspector of American Welding society
Students learn the Welding Inspection Technology as per the AWS and International Standards
Students learn the welding fundamentals, terms and definitions, welding processes, nondestructive examination, procedures, symbols, calculations.
Students learn safety practices, and duties and responsibilities of a CWI.
Students learn practical hands-on test to find the ability of visually identify welding discontinuities and to determine the acceptance or rejection of a weld.
Students learn the proficiency, ability of evaluation of test results with open book of Code application with a selected code application like API 1104.
Requirements
Degree or Diploma or Trade Certificate in Mechanical or Welding Engineering
Description
The CWI exam consists of three parts
Part A - Fundamentals
Part B - Practical,
Part C - Code Book Applications.
Part A is a closed-book exam that consists of 150 questions on the welding fundamentals, terms and definitions, welding processes, nondestructive examination, procedures, symbols, calculations, safety practices, and duties and responsibilities of a CWI.
Part B is a practical hands-on test to find the ability to visually identify welding discontinuities and to determine the acceptance or rejection of a weld.
Part C is an open book test of Code application to evaluate the applicant's familiarity and ability with a selected code application.
The pass marks for Part- A, B & C is 72%
You can refer to the full details of AWS Certification and Qualification Standards in the following documents available at free of cost on the AWS website
QC1:2016-AMD1 - Specification for AWS Certification of Welding Inspectors
B5.1:2013-AMD1 - Specification for the Qualification of Welding Inspectors
(Study the documents and be prepared well to answer any question from the document.)
In this course the candidate will learn the following
Preparation of reports
Complete knowledge and understanding of the following welding processes
SAW - PAW - RW - SMAW - SW- FCAW- GTAW -OFW- ESW- GMAW.
Thermal Spraying Soldering
Mechanical Cutting Thermal Cutting/Gouging
Brazing/Braze Welding
The fundamental principles of the following ND Tests
VT, MT, UT, PT, RT, LT
He will acquire knowledge of quality procedures Quality audits/surveillance.
Knowledge and understanding of the fundamentals of welding metallurgy
Knowledge and understanding of all the welding symbols and engineering drawings.
Base material compliance
Filler metal compliance
Filler metal storage, handling
Inspection records compliance
Verification of proper documentation compliance
Base material and filler metal compatibility
Certification of documented results and compliance
Procedure qualification records compliance
Welding procedure compliance
NDE procedures compliance
Applicable safety requirements in the workplace as per the International Standards
Who this course is for
Degree or Diploma or Trade Certificate in Mechanical or Welding Engineering, with 2 to 3 years of Industrial experience in Welding or Engineering. Teaching experience will also be considered.
Homepage

https://www.udemy.com/course/aws-certified-welding-inspector-sawgmawfcawegw-processes/