Mohammad Hamdan - Structures Design Pile Foundation Design

What you'll learn
Types of foundations
Deep foundations
Pile working mechanism
Geotechnical investigation
Cast in-situ pile construction
stresses on pile concrete under axial working load
Pile skin resistance calculation
Pile End bearing resistance calculation
Effects of pile group on pile bearing capacity
Factor of safety
Field verification of pile capacity
Estimation of flexural moment for piles
Estimation of shear force for piles
Longitudinal reinforcement for piles
Shear reinforcement for piles
Description
This course will discuss the design of pile foundations. We will learn the methods of calculating the pile bearing capacity. The bearing capacity for a pile consists of skin and end bearing resistance. Here you will understand how to calculate the skin and end bearing resistance. Also, we will discuss the effects of the pile group on pile individual bearing capacity. We will determine the impact of pile group on individual pile bearing capacity and the amount of reduction of pile bearing capacity. Also, we will discuss the safety factor for pile design and the acceptable ranges for the safety factor.
The second part of the course will discuss the type of foundations; in general, we have two types of foundation. Shallow and deep foundations. Here we will concentrate on deep foundations. Deep foundations are classified into driven and cast-in-situ piles. Cast-in-situ piles are constructed at filed by the drilling borehole in the existing ground, then filling the borehole with reinforcement and concrete. We will discuss the method of constructing cast-in-situ piles in detail. Furthermore, this course will discuss the geotechnical investigation, the importance of the geotechnical investigation, and tests conducted on the soil to determine soil bearing capacity.
The third part of this course will discuss the methods of estimating the flexural moment and shear force for piles. You will learn here how to calculate the flexural moment over the full length of the piles. Similarly, we will learn how to determine the shear force over the entire length of a pile. Furthermore, we will learn how to determine the amount of longitudinal or flexural reinforcement based on the maximum moment we computed. Also, we will learn how to determine the shear reinforcement for piles. in general, spirals are used as a shear reinforcement for piles.
Who this course is for
Persons who are interested in construction and pile foundation design

Homepage

https://www.udemy.com/course/structures-design-pile-foundation-design/