SolidCAM / InventorCAM 2021 SP2 HF1 Build 121059 (x64)

SolidCAM / InventorCAM 2021 SP2 HF1 Release Notes - Date: June 24, 2021

SOL-17649 Can't turn on or off templates in settings
SOL-17622 Restore link doesn't work
SOL-17606 Copy a Holder to the same or another Components Folder - Crashes SolidCAM
SOL-17594 Gcode/gear\_min\_spin is wrong
SOL-17579 Feed & Spin | insufficient range of decimal places
SOL-17576 Export to XML | misspelled value in XML
SOL-17570 iMachining/GUI problem with spin in m/min
SOL-17563 Turning Drill Operation/Wrong tool orientation
SOL-17542 XML Interface - Import of machining level wrong
SOL-17533 iMachining runs everything twice
SOL-17525 SolidCAM Crash when copying Tool in TLV File
SOL-17524 SolidCAM Crash after adding new Probe Job
SOL-17521 3x Undercut || Unable to calculate TP
SOL-17510 Adding 3D holder changed joints
SOL-17508 Change Submachine - incorrect context menu
SOL-17506 Machine Preview/Part move/Part jump in the Machine Preview
SOL-17484 Default state of using compensation is not as defined in VMID
SOL-17482 Milling/Error Message during NC-Code generation
SOL-17481 iMach 3D / calculation freezes
SOL-17474 Back spindle is in wrong position upon opening Machine preview
SOL-17473 feed\_teeth=0 HSS operations
SOL-17464 Default settings are not applied
SOL-17454 G-code/arc start are not relative in thread milling
SOL-17446 Tool assembly incorrect
SOL-17442 G-Code/Wrong lpos on 4x horizontal machine
SOL-17440 Portuguese version GUI issues
SOL-17427 Iscar Tool Advisor doesn't open
SOL-17423 Gcode/change bits in first @line inside sub-proc when in absolute mode are wrong
SOL-17422 SolidCAM generating Crash while using Probe Operation
SOL-17401 MCO/Wrong position of X1 axis on the beginning of MCO
SOL-17400 G-code/Different lpos values with and without procedures
SOL-17396 Hard to pick Clearance area type for 5x operations in Traditional Chinese version
SOL-17389 iMachining 2D/Not correct toolpath if cutting direction is Conventional
SOL-17387 SimTurning/no stock update for following operations
SOL-17374 Machine Simulation/After the Unloading Tool, the turret rotation is not saved
SOL-17373 Integrated Cimco doesn't work with open/close command
SOL-17350 Portuguese/GUI problems
SOL-17349 Spanish/GUI pro
SOL-17347 Korean/GUI problems
SOL-17331 French/GUI problems
SOL-17312 Problem with open pocket job zigzag
SOL-17295 Toolbox - big VMID compensation tolerance \(0.2mm\
SOL-17285 Language/Czech/GUI problems
SOL-17249 Cutting condition / unable to change cutting condition
SOL-17236 iMachining/Tool/Data/Not enough space for all data
SOL-17050 / NTT no sorting by color possible
SOL-16861 Order changed at Pocket Finish Operation | First Wall then Floor
SOL-16427 Wrong Machine Preview with 2nd angle pair
SOL-15604 HSS & Sim5x || Extend Edge Curve Loading issue
SOL-14202 Machine Simulation EXE / Wrong position of Workpiece
SOL-11699 Chinese Traditional\\GUI
SOL-11058 Machine Simulation/Origin - Delta from center/Incorrect machine simulation for face front and face back operations
SOL-2894 MAC to MAC/Wrong kinematics angle pair
SOL-17419 help of IV -not available during the geometry definition in IVcam
SOL-17402 Parallel calculation effects on operations while checking the Simulation
SOL-17376 STL build error
SOL-17104 Turning/CoordSys/Incorrect Z zero placement
SOL-17216 System crashes when files are set to Read Only
Enhancements
- Rotary Machining Improvements

SOL-17649 Can't turn on or off templates in settings
SOL-17622 Restore link doesn't work
SOL-17606 Copy a Holder to the same or another Components Folder - Crashes SolidCAM
SOL-17594 Gcode/gear\_min\_spin is wrong
SOL-17579 Feed & Spin | insufficient range of decimal places
SOL-17576 Export to XML | misspelled value in XML
SOL-17570 iMachining/GUI problem with spin in m/min
SOL-17563 Turning Drill Operation/Wrong tool orientation
SOL-17542 XML Interface - Import of machining level wrong
SOL-17533 iMachining runs everything twice
SOL-17525 SolidCAM Crash when copying Tool in TLV File
SOL-17524 SolidCAM Crash after adding new Probe Job
SOL-17521 3x Undercut || Unable to calculate TP
SOL-17510 Adding 3D holder changed joints
SOL-17508 Change Submachine - incorrect context menu
SOL-17506 Machine Preview/Part move/Part jump in the Machine Preview
SOL-17484 Default state of using compensation is not as defined in VMID
SOL-17482 Milling/Error Message during NC-Code generation
SOL-17481 iMach 3D / calculation freezes
SOL-17474 Back spindle is in wrong position upon opening Machine preview
SOL-17473 feed\_teeth=0 HSS operations
SOL-17464 Default settings are not applied
SOL-17454 G-code/arc start are not relative in thread milling
SOL-17446 Tool assembly incorrect
SOL-17442 G-Code/Wrong lpos on 4x horizontal machine
SOL-17440 Portuguese version GUI issues
SOL-17427 Iscar Tool Advisor doesn't open
SOL-17423Gcode/change bits in first @line inside sub-proc when in absolute mode are wrong
SOL-17422 SolidCAM generating Crash while using Probe Operation
SOL-17401 MCO/Wrong position of X1 axis on the beginning of MCO
SOL-17400 G-code/Different lpos values with and without procedures
SOL-17396 Hard to pick Clearance area type for 5x operations in Traditional Chinese version
SOL-17389 iMachining 2D/Not correct toolpath if cutting direction is Conventional
SOL-17387 SimTurning/no stock update for following operations
SOL-17374 Machine Simulation/After the Unloading Tool, the turret rotation is not saved
SOL-17373 Integrated Cimco doesn't work with open/close command
SOL-17350 Portuguese/GUI problems
SOL-17349 Spanish/GUI pro
SOL-17347 Korean/GUI problems
SOL-17331 French/GUI problems
SOL-17312 Problem with open pocket job zigzag
SOL-17295 Toolbox - big VMID compensation tolerance \(0.2mm\
SOL-17285 Language/Czech/GUI problems
SOL-17249 Cutting condition / unable to change cutting condition
SOL-17236 iMachining/Tool/Data/Not enough space for all data
SOL-17050 / NTT no sorting by color possible
SOL-16861 Order changed at Pocket Finish Operation | First Wall then Floor
SOL-16427 Wrong Machine Preview with 2nd angle pair
SOL-15604 HSS & Sim5x || Extend Edge Curve Loading issue
SOL-14202 Machine Simulation EXE / Wrong position of Workpiece
SOL-11699 Chinese Traditional\\GUI
SOL-11058Machine Simulation/Origin - Delta from center/Incorrect machine simulation for face front and face back operations
SOL-2894 MAC to MAC/Wrong kinematics angle pair
SOL-7078 Different B axis angle in Solid verify and in machine sim.
SOL-17321 Incorrect g-code - b_value in SC2021 is wrong
SOL-17730 MillTurn Tool reversed output to Gcode not correct
SOL-17815 Can't generate Gcode - Program Crashes
SOL-17812 Missing @turn_change_tool procedure for MCO
SOL-16499 Tool Inspection/Change || Unloaded parameter
SOL-17497 Edit templates/ No SolidCAM Part is open/ GUI behavior /MW based operations
SOL-16597 Exact stepover method || Modify error
SOL-16380 Stock || Tool-boundary relation "Center" cannot be saved
SOL-17607 Machining Process - Face - One Pass Strategy Issues
SOL-17592 Turning / internal turning / 3D Tool
SOL-17477 NTT / entered values are not always updated
SOL-17709 Carmex\SC is stuck by selecting Carmex
Enhancements
- Rotary Machining Improvements Implemente





SolidCAM is a CAM softwarethat integrates directly into SolidWorks and Inventor. Officially approved partners and all that. Their CNC programming toolsets look and feel like the CAD systems as much as possible, making the learning curve shorter. You define, calculate and verify all your machining operations without leaving the CAD environment. They can handle programming 2.5- to 5-axis machining, high-speed surface milling, wire EDM, etc. Their models are fully associative, so your toolpaths update when you make a part change. There are no import/export hassles, and you don't have to learn some CAM system's idea of a CAD application to make them work.

SolidCAM 2021 is BEST version ever. It has a Powerful New Tool Table - ToolKit (important especially for Mill-Turn & Swiss-Type customers). It also provides additional advanced functionality in all modules - 2.5D Milling, HSR, HSM, Sim. 5x, Mill-Turn and Swiss-Type.

KevCAM Night School - Sneak Peek at 2021 Tool Library

SolidCAM Incis a world leader in advanced tool path generation technology (CAM) running directly inside SolidWorks. SolidCAM features a full line of CNC machine programming software solutions ranging from 2 axis lathes and 3 axis mills to extremely complex multi-axis MillTurn machines and Wire Edm. All products run directly inside SolidWorks and provide the user with a true "SolidWorks look and feel" for ease of use and maximum efficiency. Along with the integrated interface and scalability for new machines, SolidCAM also has its patented "iMachining" that powers users to new levels of productivity and profits, through unmatched cycle time reduction and unrivaled tool life.

Product:SolidCAM / InventorCAM
Version:2021 SP2 HF1 build 121059
Supported Architectures:x64
Website Home Page :

www.solidcam.com

Language:multilanguage
System Requirements:PC *
Software Prerequisites:SolidWorks 2012-2021 / Autodesk Inventor 2021 and below
Size:10.4 Gb

Microsoft Windows 10 x64 Professional and Enterprise Editions; Microsoft Windows 8.1 x64 Professional and Enterprise Editions (with latest Service Pack); Microsoft Windows 7 x64 Professional and Ultimate Editions (with latest Service Pack)
- Intel Xeon, Intel Core, Intel Core 2 Duo, Intel Core 2 Quad or higher (If you use other processors we assume no responsibility and no support)
- 4 GB RAM (for the processing of large components, we recommend 8 GB RAM (or more)
- 15 GB free disk space for installation
- Hard disk with at least 100 GB of storage
- NVIDIA graphics card of the current Quadro series with min. 512 MB ​​(1024 MB recommended) and current, certified graphics driver (With the use of other and on-board graphics cards, we accept no responsibility and no support)
- 1,280 x 1,024 or higher screen resolution
- Microsoft Direct3D 9 or compatible graphics card (Microsoft Direct3D 11 or higher recommended)
- USB 2.0 interface
- DVD drive