RTMPMiniServer 1.7.7 Build 90 Multilingual (x64)

Category:Apps

RTMPMiniServer 1.7.7 Build 90 (x64) Multilingual | 21 Mb
Accept RTMP - streams and converts to NDI for usage into production workflow.

vMix, OBS, Wirecast
Many of our customers use software mixers such as vMix / OBS/ Wirecast.
RTMP MiniServer can receive a signal from them, as well as send a signal to them using the NDI protocol.
Use-case
Your team member can send a signal from stadium to studio using OBS. Inside studio you can accept the signal by RTMP MiniServer and send to vMix for next production steps (add overlays, comments etc).
JVC Pro camcorders
Our clients successfully use RTMPMiniServer to receive RTMP streams from
JVC professional camcorders GY-HM200/250, GY-HM650/660 and other equipped with built-in streaming encoders and RTMP protocol.
Live video from remote locations goes into studio production with the minimum delay which is very important for Remote Production over IP workflow.
LiveU and Teradek VidiU
Our clients successfully use RTMPMiniServer to receive signals from portable encoders such as LiveU and Teradek VidiU.
The signal goes to the studio production with the least delay.
It's very important for news content.
Chinese encoders such as Kiloview and URay are also supported.
By the way:
Engineers from LiveU mentioned RTMP MiniServer in the whitepaper for LiveU Solo as recommended solution.
DJI Drones
Many DJI drones support RTMP streaming.
This allows you to transfer the signal from the drone via Wifi to RTMP MiniServer.
This capture way is easier to configure and does not require wires or additional capture cards.
This method is especially relevant if you need to capture few drones.
Home Page-